How to See My WiFi GHz on Windows, Mac, Android and iPhone
Check whether a device is on 2.4, 5 or 6 GHz, decode a bare channel number correctly, and get a 2.4 GHz-only smart plug onto a one-name network.

Most people who ask how to see my wifi GHz have a smart plug that won’t pair or a room where the connection crawls. Windows 11, most Android phones and a Mac’s Option-click Wi-Fi menu show the band; iPhones don’t. Below are the exact menus, a channel decoder and a 2.4 GHz-only fix.
How to See My WiFi GHz: The Quick Answer for Each Device
The network name is the fastest clue: HomeNet-5G or HomeNet_2G gives it away. Mesh systems, Smart Connect routers and many ISP gateways use one name for all bands, so how to see my wifi GHz then depends on the device’s Wi-Fi details or the router app’s device list.
| Device | Where to look | Line to read |
|---|---|---|
| Windows 11 | Wi-Fi properties, or netsh | Network band / Band |
| Mac | Option-click the Wi-Fi icon | Channel: 149 (5 GHz, 80 MHz) |
| Android | Gear next to your network | Frequency |
| iPhone, smart plug | Router app’s device list | Each device’s band, if listed |
How to See My WiFi GHz on Windows 11
Open Settings > Network & internet > Wi-Fi, select your network’s properties and read Network band and Network channel. It’s the quickest way to answer how to see my wifi GHz on a PC.
How to see my wifi GHz from the command line
Open Terminal or Command Prompt (no admin rights needed) and run:netsh wlan show interfaces
Read Band, then Channel and Radio type.
On Windows 11 24H2 and later, netsh may print a location-permission message instead. Turn on Settings > Privacy & security > Location, including Let desktop apps access your location, then retry.
On Windows 10, netsh usually has no Band line, so how to see my wifi GHz there means reading Network band in the network’s properties (Settings > Network & Internet > Wi-Fi), or decoding the Channel with the channel table.
To list every band a one-name router broadcasts, each with its own BSSID and channel, run:netsh wlan show networks mode=bssid
It also shows each one’s signal strength.

How to See My WiFi GHz on a Mac
On a Mac, how to see my wifi GHz takes one key: hold Option and click the Wi-Fi icon in the menu bar, then read a line such as Channel: 149 (5 GHz, 80 MHz): channel, band and width. No icon? Add it in System Settings (Control Center or Menu Bar, by macOS version).
Hold Option and choose Apple menu > System Information > Network > Wi-Fi for the same line in a window. System Settings > Wi-Fi > Details shows no band.
How to See My WiFi GHz on Android and iPhone
Android: look for Frequency
On a Pixel, go to Settings > Network & internet > Internet and tap the gear next to your network to find Frequency, such as 5 GHz.
On a Samsung Galaxy, start at Settings > Connections > Wi-Fi and tap the gear; other makers’ menus differ, and some show no frequency. If yours doesn’t, how to see my wifi GHz on that phone comes down to the router’s device list.
How to know my WiFi GHz on iPhone
The Info button next to your network in Settings > Wi-Fi shows the IP address and router, but no band or channel. So on an iPhone, how to see my wifi GHz means one of these:
- Router app or admin page: the most reliable. Find the iPhone in the device list; many apps show each device’s band.
- Wi-Fi 6E mode: if tapping your network’s name shows this option, the network has a 6 GHz band. Turning it Off keeps the iPhone on 2.4 or 5 GHz.
- Separate band names: split the bands briefly (see below); the name you joined is the answer.
- A Wi-Fi scanner: Apple’s free AirPort Utility hides an undocumented one (Settings > Apps > AirPort Utility > Wi-Fi Scanner, iOS 18 and later). It shows every band your router broadcasts, not the one your iPhone is using.
Apple’s Wi-Fi 6E list starts at the iPhone 15 Pro but excludes the 15, 15 Plus, 16e and 17e. Other iPhones never use 6 GHz.
Read the Channel Number: Is It 2.4, 5 or 6 GHz?
Most advice on how to see my wifi GHz says “1-14 is 2.4 GHz, 36 and up is 5 GHz”. That fails on Wi-Fi 6E and 7, whose 6 GHz channels run 1, 5, 9 and on to 233.
| Channel number | Band | Notes |
|---|---|---|
| 3, 4, 6-8, 10-12, 14 | 2.4 GHz | 14 is Japan only |
| 1, 2, 5, 9, 13 | 2.4 or 6 GHz | Usually 2.4 GHz |
| 36-144, multiples of 4 (36, 40, 44 …) | 5 GHz | Never 6 GHz |
| 149-177 | 5 or 6 GHz | Usually 5 GHz |
| 17-33 (17, 21 …), 37-145 (37, 41 …), 181-233 (181, 185 …) | 6 GHz | Wi-Fi 6E or 7 only |
Even channels from 36 to 144 (36, 40, 44 … 144) are always 5 GHz; odd ones in that range, such as 37 or 101, are 6 GHz.
A shared number is 6 GHz only if your device supports it, the router has 6 GHz on, and the network uses WPA3, which 6 GHz requires.
US and Canadian routers usually stop at channel 11; the UK, Europe, India and Australia also use 12 and 13. Apple adds that 6 GHz features aren’t available in every region.
Why Your Device Sits on 2.4 GHz, and How to Split the Bands
Per Microsoft, 2.4 GHz reaches farther and gets through walls better but is slower and more crowded; 5 GHz is faster with less range; 6 GHz is very fast, with the shortest range. Uploads crawling? See slow WiFi upload speed.
Signal decides
When joining a one-name network, Apple devices favor 5 or 6 GHz if the signal is stronger than -65 dBm (iPhone, iPad) or -68 dBm (Mac). Farther out, 2.4 GHz is normal.
Smart plugs want 2.4 GHz
TP-Link’s Kasa plug setup guide says the plug doesn’t support 5 GHz, and your phone must be on the 2.4 GHz band during setup.
Split, rename or pause the bands for setup
Microsoft suggests a separate name per band. Apple advises one name for all bands, because separate names can make devices connect unreliably (see Apple’s router settings).
So keep one name, and split or pause bands only while a 2.4 GHz-only device joins. Renaming a band drops every device saved under the old name.
Router with Smart Connect
On many TP-Link Archer routers, turn Smart Connect off at tplinkwifi.net (Advanced > Wireless > Wireless Settings) or in the Tether app, then name each band. Menus vary by model and firmware.
eero mesh
No permanent split. In the app: Settings > Troubleshooting > My device won’t connect > My device is 2.4 GHz only > Pause 5 GHz and 6 GHz. It lasts 10 or 30 minutes, per eero’s help pages, or until you tap Cancel. Devices that join stay connected.
Nest Wifi or Google Wifi
No band choice. Google suggests moving farther from the router until your phone drops to 2.4 GHz, then running setup.
ISP gateway
Band options may be hidden or locked. Ask your provider, or try the walk-away trick.

Merging names back afterward? Reuse the 2.4 GHz band’s exact name and password.
Router Keeps Dropping 2.4 GHz? Check These Settings
If you searched how to see my wifi GHz because only 2.4 GHz gadgets drop off, start here.
- Restart and update. Restart the router and install its latest firmware.
- Security. Use WPA2/WPA3 Transitional, as Apple advises for older devices; WPA3-only can lock out older plugs and cameras.
- Channel width. Apple recommends 20 MHz on 2.4 GHz, and Auto on 5 and 6 GHz.
- Channel. Leave it on Auto, as Apple advises, or use 1, 6 or 11, since many 2.4 GHz channels overlap.
- Interference. Microwave ovens, cordless phones, wireless cameras and Bluetooth all crowd 2.4 GHz; moving laptops and phones to 5 GHz frees it up.
- Every band drops? It’s probably not the band; see our guide to a router that keeps disconnecting.
Frequently Asked Questions
How to see my wifi GHz on a smart plug or TV?
A device with no Wi-Fi details screen can’t tell you. Find it in the router app’s connected list; many apps show each device’s band, though some ISP gateways don’t.
How do I find my WiFi SSID?
It’s the network name marked Connected in your Wi-Fi settings, or the SSID line in netsh on Windows. Need the password too? See how to see your WiFi password.
What is my WiFi address: the MAC or the IP?
Usually the MAC. Windows calls it Physical address, Android lists it in Settings > About phone, and an iPhone shows it at Settings > General > About > Wi-Fi Address.
Phones on Android 10 or iOS 14 and later, and Macs on macOS Sequoia 15 or later, use a private address per network by default, so your router may list a different one. The IP is a separate number the router assigns.
The Short Version
That’s how to see my wifi GHz on every common device: Network band on Windows 11, the Channel line on a Mac, Frequency on Android, the router’s list for an iPhone. Decode bare channels with the table, and split bands only for a 2.4 GHz-only setup.
More connection fixes are in our internet guides.





Leave a comment