Windows Won’t Let Me Sign In? Fix PIN, Password and Profile Errors

Match the exact message on your sign-in screen to Microsoft's official fix, from a PIN that's no longer available to a temporary profile or a PIN you can't remove.

Toprak Kaan Genç Category: Software 9 min read
Windows Won’t Let Me Sign In? Fix PIN, Password and Profile Errors

“Windows won’t let me sign in” covers several problems, and the on-screen message tells you which one you have. Each has an official fix, cheapest checks first, and none of them bypass the lock screen.

Windows Won’t Let Me Sign In: Match the Message First

Try this first: select Sign-in options under the PIN box, choose the key icon and type your password, then set up a new PIN once you’re in.

Whether you searched “Windows won’t let me log in”, “Windows won’t let me sign in with PIN” or “Windows won’t let me sign in”, find your message here:

On the sign-in screenLikely cause
“Your PIN is no longer available”TPM or firmware change
A1B2C3 after wrong PINsPIN lockout
Face or fingerprint refusedBiometric lockout
Password rejected or missingKeyboard, account or a setting
Microsoft account, no internetFirst sign-in or reset needs internet
“Temporary profile” or “User Profile Service failed”Your profile didn’t load
Work or school PC? Call IT

If you use a work email or the PC is managed with Intune or Group Policy, “Windows won’t let me sign in” is a job for IT. Your organization resets work passwords, often at passwordreset.microsoftonline.com.

“Your PIN Is No Longer Available”: Sign In With the Password

Your PIN is tied to this PC’s TPM security chip. Clearing the TPM, replacing the motherboard or some firmware updates break that link; “Something happened and your PIN isn’t available” has the same fix.

That’s how a routine BIOS update can become “Windows won’t let me sign in” the next morning.

Sign in with your password as above, then set the PIN up again in Settings > Accounts > Sign-in options > PIN (Windows Hello). If setup fails, or Settings says “This option is currently unavailable” under PIN, sign out and back in, install updates and retry.

BitLocker may ask first

The same changes can trigger a BitLocker recovery screen asking for a 48-digit key: see where to find your BitLocker recovery key.

Still failing? Microsoft documents this command for wiping your Windows Hello container. Run it in Command Prompt as the affected user, then redo the PIN:
certutil.exe -deleteHelloContainer
On recent Windows 11 builds it also deletes this PC’s passkeys, so check Settings > Accounts > Passkeys first.

Deleting the Ngc folder is a last resort: it needs admin rights and resets Windows Hello for every user on the PC. Clearing the TPM won’t fix “Windows won’t let me sign in” either; Microsoft warns it destroys sign-in PINs.

Windows Won’t Let Me Sign In With My PIN, Face or Fingerprint

If Windows 11 won’t accept a PIN you know is right, rule these out first:

Num Lock

With Num Lock off, the number pad types no digits. Use the number row.

A1B2C3

After three wrong PINs, Windows asks you to type A1B2C3 for one more try. Miss again and you must restart. Stop guessing and reset it.

Face or finger

After several misses, that method is switched off until you sign in once with the PIN or password; restarting won’t help.

Forgot the PIN? If I forgot my PIN appears below the box (Microsoft, work or school accounts only), select it and verify your account. On a local account, sign in with the password, then use Settings > Accounts > Sign-in options > PIN (Windows Hello) > I forgot my PIN. Forgot both? Reset the password first (Microsoft’s PIN guide).

Windows Won’t Let Me Sign In With My Password: Check the Keyboard First

If Windows 11 won’t accept a password you’re sure of, check these first:

  • Caps Lock and Num Lock. On some laptops, Num Lock turns letter keys into numbers.
  • Keyboard layout. Shift + 2 types @ on a US layout but ” on a UK one. Windows key + Space switches layouts.
  • A faulty keyboard. The Accessibility button at the lower right (Ease of Access on Windows 10) opens a menu with an On-screen keyboard switch.
  • Locked out? “The referenced account is currently locked out” means too many wrong local-account passwords. Wait out the timed lockout, often about 10 minutes.
Checking Caps Lock and the keyboard layout when Windows won't let me sign in with a password

A Microsoft account wants its password, not your PIN; changed it online while this PC is offline? Try the old one. Passwordless accounts have none: use Windows Hello, or add a password back on your Microsoft account page under Additional security options > Passwordless account > Turn off.

No password option? The only allow Windows Hello sign-in setting hides it: get in with face, fingerprint or I forgot my PIN, then turn it off (steps below).

Forgot it: Microsoft account

If “Windows won’t let me sign in” means a forgotten Microsoft account password, go in this order:

1

At sign-in

Select I forgot my password (or Sign-in options > Web sign-in, if shown).

2

From a phone

Go to account.live.com/password/reset and get a code by email or text.

3

Sign-in helper

Lost every recovery option? Microsoft sends you to its Sign-in helper.

4

Recovery form

Last resort: account.live.com/acsr. Microsoft says it replies within 24 hours, though its guidance notes allow up to 5 business days.

With two-step verification on and no verification method left, Microsoft says it can’t help; its agents never send reset links (Microsoft’s reset guide).

Forgot it: local account

Select the arrow next to the password box, then OK > Reset password, and answer your security questions or use a password reset disk. Another admin can set a new password in Computer Management > Local Users and Groups (Pro) or Control Panel > User Accounts (Home).

Windows warns this can cost that account its saved passwords and encrypted files, so try the security questions first. No other admin? See the FAQ.

Windows Won’t Let Me Sign In Without Internet

A PIN works offline, but resets need Microsoft. Offline, Windows checks the last password that worked on this PC, so try your old one or reconnect first.

A Microsoft account’s first sign-in on a PC, including after a reset, needs internet because nothing is saved yet, as does the account step of Windows 11 setup. Select the network icon at the lower right and join Wi-Fi or a phone hotspot, or plug in Ethernet.

About Safe Mode

Microsoft also suggests Safe Mode: hold Shift, select Power > Restart, then Troubleshoot > Advanced options > Startup Settings > Restart, and press 5 or F5 (Safe Mode with Networking). Have your password ready: Microsoft says PIN and biometrics aren’t offered there, though some builds accept the PIN. An encrypted PC may ask for its BitLocker recovery key.

“Signed In With a Temporary Profile” or “User Profile Service Failed”

“You’ve been signed in with a temporary profile” gets you a bare desktop; “The User Profile Service failed the sign-in” stops you at the sign-in screen. Both mean your profile didn’t load.

Copy your work out now

Microsoft warns that anything created or changed in a temporary profile is lost at sign-out. Copy it to USB or the cloud first.

Microsoft’s temporary profile steps: sign in once in Safe Mode, restart normally (sometimes repeatedly), then temporarily turn off your antivirus or any app that scans the PC during sign-in.

Copying files to a USB drive before fixing a Windows temporary profile

The ProfileList fix (back up first)

This fix comes from a retired Microsoft article (KB947215), not current support pages. Run it as an administrator from the temporary profile, Safe Mode or another admin account.

  1. Press Win + R, type regedit, press Enter and approve the prompt. Paste this into the address bar and press Enter:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  2. Back up: File > Export the key to USB (File > Import restores it).
  3. Find the S-1-5-21-… key whose ProfileImagePath value points to your folder, such as C:\Users\YourName.
  4. If that SID appears twice, add .old to the key without .bak, then remove .bak from the other. If the only key ends in .bak, just remove .bak. Never delete the .bak key; it’s usually your real profile.
  5. Set RefCount and State to 0 in that key, then restart.

No .bak key at all? Microsoft’s fallback is a new local admin account: sign in to it and copy your files from C:\Users\OldName to C:\Users\NewName.

Windows Won’t Let Me Remove, Change or Reset My PIN

The flip side of “Windows won’t let me sign in” is a PIN you can’t remove. If Remove is grayed out:

  1. In Settings > Accounts > Sign-in options > Additional settings, turn off only allow Windows Hello sign-in for Microsoft accounts (Windows 10: Require Windows Hello sign-in). This also restores the password option.
  2. Under Facial recognition (Windows Hello) and Fingerprint recognition (Windows Hello), select Remove; both rely on the PIN.
  3. Reopen Settings and select PIN (Windows Hello) > Remove.

Change PIN needs the current PIN; otherwise use I forgot my PIN. If that fails, check the connection and the verification code, or use the certutil step above.

Frequently Asked Questions

After an update, Windows won’t let me sign in. What changed?

Microsoft says security updates or system changes can make Windows ask for a new PIN. Sign in with the password and set one up.

If Windows won’t let me sign in, will these fixes delete my files?

A PIN reset doesn’t touch files, but it replaces your Windows Hello keys, so passkeys may need re-adding. Copy anything out of a temporary profile before you sign out.

Windows won’t let me sign in to a local account, and there’s no other admin. Now what?

Microsoft can’t recover a local password, and we don’t cover bypass tricks. Its answer is Reset this PC (hold Shift, select Power > Restart, then Troubleshoot). Keep my files keeps your accounts, forgotten password included, so plan on Remove everything, which erases your files and apps. On an encrypted PC, have your BitLocker recovery key ready.

Can I fix it myself when Windows won’t let me sign in to a work PC?

Usually not. Your organization resets work passwords, Windows Hello for Business doesn’t let you turn the PIN off, and some PIN resets need the company network.

After too many PIN tries, Windows won’t let me sign in. How long is the wait?

Microsoft’s Windows Hello for Business documentation lists lockouts of 1, 2 and 10 minutes after the first, fourth and fifth restarts, growing from there; home PCs may differ. I forgot my PIN is faster.

Recap: The Order That Saves Time

Whatever “Windows won’t let me sign in” message you see, switch to the password first, then rule out the keyboard, the lockout and the network. Keep certutil, the Ngc folder and Reset this PC for last.

Browser acting up too? See why Chrome keeps switching to Yahoo, or browse more software and app fixes.

Leave a comment

Your email address will not be published.